Description
Custom 350ml Japanese Style Insulated Thermoses
Why 350ml is a normal size in Japan
Japanese drinkware assortments assume a bag, not a car. A 350ml thermos fits a tote, a bento bag and a bicycle basket, and it matches the volume of a canned coffee that the same customer buys from a vending machine. That cultural reference is the reason the size persists rather than being a niche variant.
For a buyer outside Japan, 350ml usually works as an entry size or a gift item, not as the primary hydration product. Knowing which role the product plays determines the lid, the coating and the price point.
Proportion matters more than capacity
A 350ml body at 60mm diameter is a stubby cylinder; at 55mm it reads as a tall slim bottle. Both hold the same volume and they sell to different customers. The diameter-to-height ratio is the design decision, and it is constrained by the neck: a 42mm neck on a 55mm body leaves very little shoulder to work with.
Drawing a 55mm body with a 42mm neck requires a long shoulder transition, which is where wall thinning appears. Ask for the thickness at the shoulder on a sectioned sample before approving the shape.
One-touch lids and their failure modes
The one-touch lid that defines this category uses a spring-loaded latch and a silicone plug. Its failure modes are the spring losing tension and the plug taking a set. Both appear after roughly a year of daily use, and both present as a lid that no longer snaps shut.
Stainless springs last longer than coated steel and cost a few cents more. A plug with a molded rib rather than a flat disc holds its shape longer under compression.
Coating systems and the dishwasher
The Japanese market expects a thermos to survive a dishwasher even when the instructions say hand wash. A two-coat powder system with a primer holds up far better than a single coat, and it shows in the third year rather than the first. If the product carries a brand with a reputation for finish quality, the second coat is not optional.
What to specify for a first order
Four lines: neck diameter, shoulder wall thickness, spring material, and coating system. Add the lid plug durometer if the product is positioned as leak-proof. With those settled, a 350ml program runs without the two problems that plague this size: shoulder thinning and lids that stop latching.
Ordering & lead time
| Minimum order quantity | 100 pcs per SKU |
| Sampling lead time | 3 days |
| Production lead time | 7 days |
| Monthly capacity | 100,000 pcs |
Lead times apply to existing tooling and standard colours. New mould development or custom colour matching carries its own schedule — confirm before committing to a delivery date.